Study on stress and deformation of keyhole gas tungsten arc-welded joints

Keyhole gas tungsten arc welding(K-TIG)of Q345 low alloy steel plates was simulated by using SYSWELD software.The temperature field of the K-TIG welding process was simulated with three different combined heat sources and was compared with the weld profile that was obtained experimentally.The temperature field that was obtained by a combination of a double ellipsoid heat source on the upper half and a three-dimensional Gauss heat source on the lower half was similar to the real situation.The effects of plate thickness,gap and welding speed on the deformation and stress of the K-TIG welded joints were investigated by K-TIG welding numerical simulation.A reduction in the thickness of the weld plates reduced the z-direction deformation and transverse residual stress;an appropriate gap reduced the residual stress and an increase in the welding speed reduced deformation after welding,but did not help to control the residual stress after welding.     

深埋巷道围岩变形及支护技术研究

随着煤炭开采逐渐向深部转移,巷道围岩变形越来越严重。分析了深埋巷道围岩变形及支护技术,对研究巷道进行了三轴抗拉试验,得到煤和岩石力学参数,采用结构梁和弹性力学分析了巷道围岩变形,为模型分析提供了理论基础,然后采用FLAC^3D数值模拟软件,分析了巷道变形位移,与现场实测相比,数值模拟能够较好地模拟煤矿巷道实际变形情况。研究能够为巷道参数设计提供借鉴。     

CAD/CAE在塑件成型中的模拟分析与优化研究进展

综述了计算机辅助设计(CAD)/计算机辅助工程(CAE)技术在普通塑料制品制造、汽车轻量化以及航天航空等领域的应用。首先建立产品三维模型并进行塑件分析,初步设计出模具的结构,通过优化得到概念化的模具结构;然后进行注塑模具的详细设计,包括型芯型腔的设计、成型零部件的设计,以及对浇注系统、冷却系统、侧向抽芯、顶出机构的设计,通过充填分析、流动分析、冷却分析、翘曲分析使模具设计趋于完善。使用CAD/CAE仿真技术可以保证塑件模具结构设计的可靠性和高效性,降低了生产成本,提高了产品设计质量。     

汽车雨挡导流片浮顶式侧抽芯机构注射模设计

介绍了一款汽车雨挡导流片异型塑件两板注射模的结构设计,该模具基于采用常规的滑块抽芯机构及斜顶机构难以实现塑件完全脱模的机构设计困难问题,突破常规设计思路,设计了一种型芯浮顶式侧抽芯机构来实现塑件的自动化注射生产。机构中,在模具开模打开后,通过顶出板及顶杆将塑件和部分成型一同顶出,而后再通过侧边二次顶出机构将塑件从局部型芯上顶出而实现塑件的完全脱模,有效地简化了模具结构设计,降低了模具的加工制造难度,降低了模具的制造成本,模具结构复杂新颖,工作稳定可靠,为异型类塑件的模具结构及机构设计创新设计提供了一个较好的案例借鉴。     

Experimental and numerical investigations of the compressive behavior of carbon fiber-reinforced polymer-strengthened tubular steel T-joints

A method for strengthening damaged tubular steel T-joints under axial compression by wrapping them with carbon fiber-reinforced polymer (CFRP) sheets was proposed and evaluated. The influence of the CFRP strengthening on the failure mode and load capacity of T-joints with different degrees of damage was investigated using experiments and finite element analyses. Five T-joints were physically tested: one bare joint to obtain the peak load and corresponding displacement (D_1m), two reinforced joints to provide a reference, and two pre-damaged then retrofitted joints to serve as the primary research objects. The ratio of the pre-loaded specimen chord displacement to the value of D_1m was considered to be the degree of damage of the two retrofitted joints, and was set to 0.80 and 1.20. The results demonstrate that the maximum capacity of the retrofitted specimen was increased by 0.83%–15.06% over the corresponding unreinforced specimens. However, the capacity of the retrofitted specimen was 2.51%–22.77% lesser compared with that of the directly reinforced specimens. Next, 111 numerical analysis models (0.63≤b≤0.76, 9.70≤g≤16.92) were established to parametrically evaluate the effects of different geometric and strengthening parameters on the load capacity of strengthened tubular T-joints under different degrees of damage. The numerical analysis results revealed that the development of equivalent plastic strain at the selected measuring points was moderated by strengthening with CFRP wrapping, and indicated the optimal CFRP strengthening thickness and wrapping orientation according to tubular T-joint parameters. Finally, reasonable equations for calculating the load capacity of CFRP-strengthened joints were proposed and demonstrated to provide accurate results. The findings of this study can be used to inform improved CFRP strengthening of damaged tubular steel structures.     

Ca对Mg-Gd-Y-Zn-Zr合金热变形行为及热加工性能的影响

利用Gleeble3500热模拟试验机研究了Ca对Mg-Gd-Y-Zn-Zr合金在变形温度573～723 K,应变速率0.001～1 s-1的热变形行为及热加工性能的影响。结果表明:Ca增大了合金的流变应力及变形激活能,扩宽了加工安全区及最佳加工区范围,但降低了最大功率耗散因子及动态再结晶程度。结合激光共聚焦显微镜分析了合金热压缩后组织,验证了热加工图的准确性,并制定了合理的热加工工艺,Mg-Gd-Y-Zn-Zr合金的最佳加工区域为:应变速率0.001～0.01 s~(-1),温度623～723 K。根据最佳加工工艺参数获得了表面质量良好,无变形缺陷的等温锻造合金。     

等通道转角挤压制备超细晶材料的最新研究进展

等通道转角挤压(Equal channel angular pressing,ECAP)方法是制备性能优异超细晶材料最常见的大塑性变形方法之一。模角、挤压路径、挤压道次、挤压温度和挤压速度等因素都会影响等通道转角挤压制备超细晶材料的性能;等通道转角挤压的模具也在不断地优化,如背压-等通道转角挤压(Back pressure ECAP,BP-ECAP)模具、可加热的模具以及在等通道转角挤压基础上形成的板材连续剪切技术等,这些新的模具可以改变ECAP变形过程中的组织均匀性。本文综述了等通道转角挤压制备超细晶材料的最新研究进展,并指出了几个需要深入研究的问题及方向。     

Experimental and numerical assessment of energy absorption capacity of thin-walled Al 5083 tube produced by PTCAP process

The energy absorption capacity of the Al5083 thin-walled tube produced by parallel tubular angular pressing (PTCAP) process was evaluated. Also, microstructure, mechanical properties, and anisotropy coefficients were studied in the peripheral and axial directions. Results showed that values of energy absorption decreased with processing pass increasing and the values for the unprocessed, first and second passes were obtained to be 167, 161.4 and 160.7 J, respectively. The differences between the simulation results for the energy absorption values and their experimental values for the unprocessed, the first and the second PTCAP passes samples are about 5%, 10%, and 13%, respectively. The energy absorption capacity was related to the anisotropy coefficient and microstructure. The results demonstrated that grain refinement occurred and ultimate tensile strength (UTS) and microhardness after the first and second PTCAP passes were enhanced, while the increase rate in the first pass was much severer. Also, by applying PTCAP, the deformation modes were altered, such that the deformation mode of the annealed tube was quite symmetrical and circular while for the first and second passes there have been triple and double lobes diamond. The results of the numerical simulation for the deformation mode of the annealed and PTCAPed tubes were consistent with the experimental results. The deformation mode of tubes is dependent on their mechanical properties and variation of the mechanical properties during PTCAP process.     

Microstructure and mechanical properties of fine grained uranium prepared by ECAP and subsequent intermediate heat treatment

The microstructure and mechanical properties of fine grained uranium prepared by equal channel angular pressing (ECAP) and subsequent intermediate heat treatment were investigated systematically by the confocal laser scanning microscope (CLSM), electron backscatter diffraction (EBSD) and split Hopkinson pressure bar (SHPB). The results show that the initial coarse grained uranium was refined from about 1000 to 6.5 μm prepared by ECAP at 3 passes and subsequent heat treatment, and the corresponding dynamic yield strength increased from 135 to 390 MPa. For the ECAPed uranium samples, the relationship between grain size and yield strength could be described by classical Hall–Petch relationship, and the fitting Hall–Petch relationship for the fine grained uranium samples prepared by ECAP was drawn.     

New observations and critical assessments of incipient plasticity events and indentation size effect in nanoindentation of ceramic nanocomposites

The ceramic nanocomposites (CNCs) like zirconia toughened alumina (ZTA) ceramics are important futuristic materials for structural and functional applications in advanced strategic systems, structural components, biomedical prostheses and devices. In all structural materials including the ZTA CNCs, the very early stages of plastic deformation i.e., the incipient plasticity events (IPE) are most important to be understood so that the microstructure and mechanical properties can be tuned to suit a given end application. Here we report for the first time the mechanisms of IPE in the nanoindentation experiments conducted at 10–1000 mN loads in the 40 ZTA CNCs. Here 40 ZTA CNC stands for 40 vol% of 3 mol% Yttria partially stabilized zirconia toughened alumina (40ZTA) CNC. The role of load ranges in variations of the IPE related parameters in the 40 ZTA CNCs is also studied. Further, an attempt is made to assess how the amount of zirconia content in ZTA CNCs affects the variations of the IPE related parameters. Through the extensive usage of field emission scanning electron microscopy (FESEM) and theoretical estimations, efforts are also directed to check out the linkage, if any, between the localized shear deformation and/or microcracking with the IPE events that occur in the present CNCs. In addition, a new concept of damage resistance is introduced for the first time in the present work to explain the presence of a strong indentation size effect (ISE) in the 40 ZTA CNCs. Finally, an attempt is also directed to understand how the indentation load (P) controls the relative size of interaction zones of dislocation loops as well as the damage resistance and thereby, engineer the acuteness of the ISE in ZTA CNCs. The implication of these findings in futuristic design of especially the ZTA CNCs for various applications is also discussed.